![background image](http://html.mh-extra.com/html/sony/icf-c153v/icf-c153v_operating-instructions_399840001.webp)
3-238-577-23(1)
TV/WEATHER/FM/AM PLL Synthesized
Clock Radio
ICF-C153V
FM/AM PLL Synthesized
Clock Radio
ICF-C143
Operating Instructions
Manual de instrucciones (en el reverso)
© 2002 Sony Corporation Printed in China
Dream Machine is a trademark of Sony Corporation.
Dream Machine es marca comercial de Sony Corporation.
English
WARNING
To prevent fire or shock hazard, do not expose
the unit to rain or moisture.
This symbol is intended to alert the user
to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock to persons.
This symbol is intended to alert the user
to the presence of important operating
and maintenance (servicing) instructions
in the literature accompanying the
appliance.
∗
The graphical symbols are at the bottom of the
unit.
For the customers in the USA
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate
this equipment.
INFORMATION
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving
antenna.
—Increase the separation between the
equipment and receiver.
—Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced
radio/TV technician for help.
If you have any questions about this product, you
may call:
Sony Customer Information Services Center
1-800-222-7669 or write to:
Sony Customer Information Services Center 12451
Gateway Blvd., Ft Myers, FL 33913
Declaration of Conformity
Trade Name:
SONY
Model:
ICF-C153V
Responsible Party:
Sony Electronics Inc.
Address:
680 Kinderkamack Road,
Oradell, NJ 07649 USA
Telephone Number: 201-930-6972
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
For customers who purchased this product in the USA
Please register this product on line at http://www.sony.com/productregistration.
Proper registration will enable us to send you periodic mailings about new products, services, and
other important announcements.
Registering your product will also allow us to contact you in the unlikely event that the product
needs adjustment or modification. Thank you.
There is a tactile dot beside volume to
show the direction to turn up the volume.
The PRESET TUNING 3 button has
a tactile dot.
VOLUME
AC power cord
FM wire
antenna
ICF-C153V
ICF-C143
ICF-C153V
ICF-C143
ICF-C153V
ICF-C143
Before You Begin
Thank you for choosing the Sony Dream Machine.
The Dream Machine will give you many hours of
reliable service and listening pleasure.
Before operating your unit, please read these
instructions thoroughly and retain them for future
reference.
These instructions cover the models ICF-C153V
and ICF-C143, and their difference is as follows:
Model Number
ICF-C153V
ICF-C143
Band
TV/WEATHER/
FM/AM
FM/AM
Features
• TV/WEATHER/FM/AM 4 band (ICF-C153V) or
FM/AM 2 band (ICF-C143) PLL (phase locked
loop) synthesized clock radio
• Stand by Weather Alert call you if you set the
“standby weather alert” mode (ICF-C153V only).
• Easy Preset Digital Tuning with 25 memory
presets for ICF-C153V, 15 memory presets for
ICF-C143
• Easy nap timer –one push operation.
• Dual Alarm (radio and buzzer) with the
extendable snooze function.
• LCD with backlight which has a brightness
control switch (high/middle/low).
• D.S.T. (Daylight Saving Time) –Summer time
calculation
Setting the Clock
1
Plug in the unit.
“AM 12:00” flashes on the display.
2
Press
CLOCK SET
for a few seconds until
a beep sounds.
The hour starts to flash on the display.
3
Press
TUNE/TIME SET +
or
–
until the
correct hour appears.
To set the current time rapidly, hold down
TUNE/TIME SET +
or
–
.
4
Press
CLOCK SET
once.
The minute starts flashing.
5
Repeat steps 3 and 4 to set the minute.
Two short beeps sound, and the counting of the
seconds starts.
If you quit during the clock setting, after about 65
seconds the previous display will return.
To set the current time from zero seconds, press
CLOCK SET
with the time signal in step 5.
To change the display to the daylight saving
time (summer time) indication
Press
SUMMER T. D.S.T.
.
“
” is displayed and the time indication changes
to summer time.
To deactivate the summer time function, press
SUMMER T. D.S.T.
again.
To set the brightness of the backlight
Press
BRIGHTNESS
to select high, middle or low for
the display according to your preferences.
Playing the Radio
—Manual Tuning
1
Press
RADIO ON•SLEEP
to turn on the
radio.
The display shows the band and frequency for
a few seconds and then changes back to the
current time.
2
Press
BAND
to select the band.
Each press changes the band as follows:
ICF-C153V
WEATHER
TV
AM
FM1
FM2
ICF-C143
AM
FM1
FM2
When using FM1 or FM2 preset mode, you may
listen to the radio on either mode. (See
“Presetting Your Favorite Station”.)
3
Press
TUNE/TIME SET +
or
–
to tune in to
the desired station.
Two short beeps sound when the minimum
frequency of each band is received during
tuning.
4
Adjust volume using
VOLUME
.
To check the station being received
Press
TUNE/TIME SET +
or
–
lightly. The display
shows the band and frequency for a few seconds
and then returns to the previous display.
To turn off the radio, press
OFF•ALARM RESET
.
Improving the
Reception
TV*/WEATHER*/ FM:
Extend the FM wire antenna fully to increase
reception sensitivity.
* ICF-C153V only
AM:
Rotate the unit horizontally for optimum
reception. A ferrite bar is built in to the unit.
Do not operate the unit over a steel desk or
metal surface, as this may lead to interference
of reception.
Presetting Your
Favorite Station
—Preset Tuning
You can preset up to 10 stations in FM (5 stations in
FM1, 5 stations in FM2), and 5 stations in each AM,
TV*, WEATHER*.
* ICF-C153V only
Presetting a Station
1
Follow steps 1 to 4 in “Playing the Radio”
and manually tune in to the station you
wish to preset.
2
Hold down the preset button you wish to
preset for more than 2 seconds.
Example:
Display window when you set FM
90 MHz in the
PRESET TUNING
2
button for FM2.
The preset number “2” and “
” flash in
the display.
Two beeps sound, and “2” and “
” stop
flashing.
To preset another station, repeat these steps.
To change the preset station, tune in to the
desired station and hold down the
PRESET
TUNING 1
to
5
button. The new station will
replace the previous station on the preset
button.
Tuning in to a Preset Station
1
Press
RADIO ON•SLEEP
to turn on the
radio.
2
Press
BAND
to select the band.
3
Press the desired preset button.
4
Adjust the volume using
VOLUME
.
After a few seconds, the display will return to
the current time but the preset button number
will remain.
Note
Holding down the desired
PRESET TUNING
button
for more than a few seconds in step 3 will replace
the previous station on the
PRESET TUNING
button
with the station you tuned in to.
Setting the Stand by
Weather Alert
(ICF-C153V only)
When the Stand by Weather Alert is set, emergency
broadcasting is informed by the buzzer.
Make sure to turn the radio off before using this
function.
1
Press
STAND BY WEATHER ALERT
while the radio is not playing.
The display shows the received Stand by
Weather Alert channel for 10 seconds and then
changes to the current time.
The previously received Stand by Weather
Alert channel will be received.
When you set the Stand by Weather Alert for
the first time, press
TUNE/TIME SET +
or
–
to
check the channel available in your residential
area, and select that channel.
2
Press
STAND BY WEATHER ALERT
again.
The Stand by Weather Alert will be in a
standby mode and the
STAND BY WEATHER
ALERT
indicator lights up.
No sound can be heard from the speaker even
when the Stand by Weather Alert is in standby
mode.
To Receive the Emergency
Broadcasting
When the tone signal is received while the
Stand by Weather Alert is on standby
A beep sounds for 20 seconds and the
STAND BY
WEATHER ALERT
indicator flashes for 12 hours.
At this time, the beep sounds louder than usual.
1
Press
STAND BY WEATHER ALERT
while the STAND BY WEATHER ALERT
indicator flashes.
Emergency broadcasting is received.
2
Press
STAND BY WEATHER ALERT
again to turn off the radio.
To return to the usual band reception
Press
OFF•ALARM RESET
to turn off the radio, and
then turn on the radio. (See “Playing the Radio”)
Notes
• If the alarm function has started up while the
Stand by Weather Alert is in the standby mode,
the Stand by Weather Alert will be deactivated
temporarily only while the radio or buzzer alarm
sounds.
• If an invalid key is pressed while the Stand by
Weather Alert is functioning, an error beep
sounds.
Setting the Alarm
You can set two types of alarms, radio (ALARM A)
and buzzer (ALARM B).
The alarm will come on at the same time everyday.
Before setting the alarm, make sure to set the clock.
(See “Setting the Clock”)
Notes
• The factory setting alarm time for radio (ALARM
A) and buzzer (ALARM B) is “AM 12:00”.
• If you quit during the alarm setting, after about
65 seconds the previous display will return.
To Set the Radio Alarm
(ALARM A)
1
Press
A RADIO•ALARM SET
for a few
seconds until a beep sounds.
“
A
RADIO
” and the hour flash on the display.
2
Press
TUNE/TIME SET +
or
–
to set the
desired hour.
3
Press
A RADIO•ALARM SET
.
4
Repeat steps 2 and 3 to set the minute.
A beep sounds to confirm the setting of time.
“WAKE UP STA” appears and the preset
number flashes on the display.
5
Press
TUNE/TIME SET +
or
–
to select the
wake up station.
Preset number changes in the order as follows:
ICF-C153V
-
AM P1 to 5
FM1 P1 to 5
FM2 P1 to 5
TV P1 to 5
WEATHER
P1 to 5
ICF-C143
-
AM P1 to 5
FM1 P1 to 5
FM2 P1 to 5
“–” is the last received station.
You can directly select the desired wake up
station by pressing
BAND
or the
PRESET
TUNING
button while the indication “–” is not
displayed.
6
Press
A RADIO•ALARM SET
.
Two beeps sound to confirm the setting.
To use ALARM A, set the alarm mode. (See
“Setting the Alarm Mode”.)
When the alarm comes on at the preset time,
“
A
RADIO
” flashes on the display and the wake up
station (the station selected in step 5) comes on.
The radio is turned off automatically after about 30
minutes (ICF-C153V) or about 60 minutes (ICF-
C143).
To check the alarm setting
Press
A RADIO•ALARM SET
once. The display
shows the preset time.
If you press
A RADIO•ALARM SET
again, the
display shows the wake up station.
To return to the previous display, press
CLOCK SET
or wait for a few seconds.
To Set the Buzzer Alarm
(ALARM B)
1
Press
B BUZZER•ALARM SET
for a few
seconds until a beep sounds.
“
B
BUZZER
” and the hour flashes on the display.
2
Press
TUNE/TIME SET +
or
–
to set the
desired hour.
3
Press
B BUZZER•ALARM SET
.
4
Repeat steps 2 and 3 to set the minute.
A beep sounds to confirm the setting of time.
5
Press
B BUZZER•ALARM SET
again.
Two beeps sound to confirm the setting.
To use ALARM B, set the alarm mode. (See
“Setting the Alarm Mode”.)
When the alarm comes on at the preset time,
“
B
BUZZER
” flashes on the display.
The buzzer is turned off automatically after about
30 minutes (ICF-C153V) or about 60 minutes (ICF-
C143).
To check the alarm setting
Press
B BUZZER•ALARM SET
once. The display
shows the preset time.
To return to the previous display, press
CLOCK SET
or wait for a few seconds.
Setting the Alarm Mode
Before setting the alarm mode, be sure to set the
alarm time. (See “Setting the Alarm”)
Press
ALARM MODE
repeatedly until the desired
mode is selected.
Each press of
ALARM MODE
changes the
indication on the display as follows:
No alarm
Indication
A
RADIO
A
RADIO
B
BUZZER
B
BUZZER
If the same alarm time is set for both radio and
buzzer alarm (ALARM A and B), the radio alarm
(ALARM A) takes priority.
To Doze for a Few More
Minutes
Press
SNOOZE/SLEEP OFF
.
The radio or buzzer turns off but will automatically
come on again after about 10 minutes. Every time
you press
SNOOZE/SLEEP OFF
, the snooze time
changes as follows:
10
20
30
40
50
60
The maximum length of the snooze time is 60
minutes.
The display shows the snooze time for a few
seconds and returns to show the current time.
When you press
SNOOZE/SLEEP OFF
after the
current time appeared, the snooze time starts from
10 minutes again.
Note
The
SNOOZE/SLEEP OFF
button does not function
while the Stand by Weather Alert is on standby.
To Stop the Alarm
Press
OFF•ALARM RESET
to turn off the alarm.
The alarm will come on again at the same time the
next day.
To Deactive the Alarm
Press
ALARM MODE
repeatedly so that “
A
RADIO
”
and “
B
BUZZER
” go off.
Using the NAP Timer
(Count Down Timer)
The NAP timer sounds the buzzer after a preset
time duration.
Press
NAP
repeatedly until the desired minutes is
displayed.
Every press changes the display as follows:
OFF
(current time)
10
20
90
120
60
30
The NAP indicator turns on, “
” and the NAP
time is displayed for a few seconds.
NAP timer starts counting down the NAP time.
When selected NAP time has passed, the beep
sound comes on, and the NAP indicator and
“
” on the display flash.
To Stop NAP Timer
Press
NAP
or
OFF•ALARM RESET
to turn off the
buzzer.
To Deactive NAP Timer
Press
NAP
. The NAP indicator and “
” go
off.
Setting the Sleep
Timer
You can enjoy falling asleep to the radio using the
built-in sleep timer that turns off the radio
automatically after a preset duration.
Press
RADIO ON•SLEEP
.
The radio turns on. You can set the sleep timer to
durations of 90, 60, 30, or 15 minutes. Every press
changes the display as follows:
On
90
60
30
15
Two short beeps sound when the display returns to
“On”.
“
” will appear in the display when the
duration time is set.
The radio will play for the time you set, then shut
off.
To turn off the radio before the preset time
Press
SNOOZE/SLEEP OFF
or
OFF•ALARM RESET
.
To Use Both Sleep Timer and
Alarm
You can fall asleep to the radio and also be
awakened by the radio or buzzer alarm at the
preset time.
1
Set the alarm. (See “Setting the Alarm”.)
2
Set the sleep timer. (See “Setting the Sleep
Timer”.)
Troubleshooting
Should any problem occur with the unit, make the
following simple checks to determine whether or
not servicing is required.
If the problem persists, consult your nearest Sony
dealer.
The clock does not show the correct time.
• Has an electrical power outage lasting more than
1 minutes occurred?
The radio or buzzer alarm does not sound at the
preset alarm time.
• Has the desired radio or buzzer alarm been
activated? (i.e. Is “
A
RADIO
” or “
B
BUZZER
”
displayed?)
The radio alarm is activated but no sound comes
on at the preset alarm time.
• Has
VOLUME
been adjusted?
The preset stations may be deleted from the
memory, if a maintenance service is performed.
Please note down your settings in case you want to
preset them again.
Precautions
• Operate the unit only on 120 V AC, 60 Hz.
• To disconnect the power cord (mains lead), pull it
out the plug, not by the cord.
• Do not leave the unit in a location near a heat
source such as a radiator or airduct, or in a place
subject to direct sunlight, excessive dust,
mechanical vibration, or shock.
• Do not place the unit on surfaces (rugs, blankets,
etc.) or near materials (curtains, draperies) that
block the ventilation holes.
• Should any liquid or solid object fall into the unit,
unplug the unit and have it checked by qualified
personnel before operating it further.
• When the casing becomes soiled, clean it with a
soft cloth dampened with a mild detergent
solution. Never use abrasive cleaners or chemical
solvents, as they may mar the casing.
If you have any questions, please consult your
nearest Sony dealer.
Specifications
Time display
12-hour system
Frequency range
TV:
2 – 13 ch (ICF-C153V only)
WEATHER:
1 – 7 ch (ICF-C153V only)
FM:
87.5 – 108 MHz
AM:
530 – 1 710 kHz
Speaker
Approx. 6.6 cm (2
5
/
8
inches) dia. 8
Ω
Power output
170 mW (at 10 % harmonic distortion)
Power requirements
120 V AC, 60 Hz
Dimensions
Approx. 118.5
×
116.5
×
126 mm (w/h/d)
(4
3
/
4
×
4
5
/
8
×
5 inches) including projecting
parts and controls
Mass
ICF-C153V:
Approx. 730 g (1 lb 9.6 oz)
ICF-C143:
Approx. 715 g (1 lb 9.1 oz)
Design and specifications are subject to change
without notice.