Nivus NivuSonic Clamp On, Инструкция по эксплуатации

Страница: 53 / 110

Instruction manual
NivuSonic Clamp on ®
The complete system time is indicated after the settings have been confirmed:
1 Date
2 Week
number
3 Time
Fig. 8-10 Complete system time
This menu point is for indicating purposes only. Hence the system time cannot
be adjusted here. Modifications can be carried out in the individual menus “Date”
and "Time“. The according week number will bet set automatically as soon as
the date has been set.
Total counter
This menu allows to newly set the totaliser indicated on the main screen. This
feature is normally going to be performed in case of replacing a transmitter
which has to indicate the same value as before replacement.
After the new value has been set confirm twice using the "Enter“ key and type in
the code number “2718“ (up to 2 faulty entries possible). Otherwise the new
value will not be accepted.
Fig. 8-11 Totaliser modification
Fig. 8-12 Service code request
NivuSonic CO - Rev. 00 as of 08.12.2010 Page 53