®
Instruction manual
NivuSonic Clamp on
8.2
Parameter Setting Basics
The transmitter in the background operates with the settings which have been
entered at the beginning of the parameter setting. Just after you finish the new
entries, the system asks to accept the new values.
If “yes”, it requires to enter the code number.
2718
Type in 2718 if prompted.
Never give the code number to any unauthorised persons. Even do not leave
the code next to the equipment or write it down on it. The code number pro-
tects against unauthorized access.
If a faulty code has been entered three times the parameter mode will be
aborted. The unit will proceed to operate using the values set earlier. If the cor-
rect code has been entered the modified parameters are accepted and the sys-
tem resets. This reset will take approx. 20-30 seconds.
Besides having the option to save modified parameters or to reject any modifica-
tion by pressing >No< at the end of the parameter setting procedure, it is possi-
ble to jump back to the previous level using the >Back< function. This enables
the user to modify settings which might have been forgotten without the need to
buffer previously modified settings.
Fig. 8-1
Screen on end of parameter setting
If parameter settings are not going to be modified but just verified by selecting
each parameter, there will be no request at the end of the dialog.
Modifications concerning language, units, contrast and display brightness do not
require the code to be entered as these settings influence just the way of repre-
sentation and not measurement or output.
This instruction manual describes all programming options of the Nivu-
Sonic CO. Depending on the device type various inputs and outputs may not
be available. They may be programmable, but may not be available to be used
as outputs or to be connected (see also Chapter 2.3).
After mounting and installing sensor and transmitter (see previous chapters) ac-
tivate the power supply.
Page 48
Содержание NivuSonic Clamp On
Страница 22: ...Instruction manual NivuSonic Clamp on Fig 6 2 Clamp wiring NivuSonic CO wall mount enclosure Page 22...
Страница 30: ...Instruction manual NivuSonic Clamp on Fig 6 16 AC model power supply Fig 6 17 DC model power supply Page 30...
Страница 109: ...18 Declaration of Conformity...
Страница 110: ......