Nivus CS2 Series, Технические инструкции

Страница: 15 / 84

Technical Instructions for
Correlation Sensors
®
Correlation Sensors – Rev. 07 as of 20.04.2016 Page 15
POA- Type
V200 without Level Measurement
KT Wedge sensor made of PPO with PEEK sensor face; ground plate 1.4571
KP Wedge sensor made of high resistant full PEEK, ground plate 1.4571
KX
RT Pipe sensor made of PPO with PEEK sensor face; pipe body 1.4571
RP Pipe sensor made of high resistant full PEEK; pipe body 1.4571
RX Pipe sensor, special construction
V2H1 with ultrasound from bottom up for Level Measurement
KT Wedge sensor made of PPO with PEEK sensor face; ground plate 1.4571
KP Wedge senor made of high resistant full PEEK, ground plate 1.4571
KX
RT Pipe sensor made of PPO with PEEK sensor face; pipe body 1.4571
RP Pipe sensor made of high resistant full PEEK; pipe body 1.4571
RX Pipe sensor, special construction
V2D0 with Pressure Measurement Cell for Level Measurement
KT Wedge sensor made of PPO with PEEK sensor face; ground plate 1.4571
KX Wedge sensor, special construction
V2U1
KT Wedge sensor made of PPO with PEEK sensor face; ground plate 1.4571
KX Wedge sensor, special construction
Approvals (ATEX)
0 none
E Zone 1
10 10 m
15 15 m
20 20 m
30 30 m
50 50 m
99 100 m
XX Special length upon request
1B 10 m, FEP coated*
2B 20 m, FEP coated*
3B 30 m, FEP coated*
5B 50 m, FEP coated*
9B 100 m, FEP coated*
XB Special length / special construction*
Sensor with spatial allocation of flow velocities
covering a maximum of 16 scan layers
Wedge sensor, special construction (e.g. made of high resistant full PEEK
with ground plate made of Hastelloy or Titanium).
Wedge sensor, special construction (e.g. made of high resistant full PEEK
with ground plate made of Hastelloy or Titanium).
Cable Length (max. 150 m /
with pressure measurement cell up to 30 m)
with Pressure Measurement Cell and ultrasound from
bottom up for Level Measurement