Technical Instructions for
Correlation Sensors
®
Correlation Sensors – Rev. 07 as of 20.04.2016
Page 5
1
General
Important
READ CAREFULLY BEFORE USE
KEEP IN A SAFE PLACE FOR LATER REFERENCE
This Technical instruction is an original instruction for Correlation Sensors and
external Electronic Box is intended for the initial start-up or the connection of the
sensors. This manual is oriented exclusively to qualified expert personnel.
Read this Technical instruction carefully and completely prior to installation and
connection since it contains relevant information on this product. Observe the
notes and particularly follow the warning notes and safety instructions.
Keep this manual in a safe place and make sure it is available for the users of
this product at any time.
If you should have problems to understand information contained within this
Technical Instruction either contact the manufacturer or one of the distributors
for further support. The manufacturer cannot be held responsible for damage to
persons or material due to incorrectly understood information in this instruction.
In case of selling the sensors, this Technical instruction shall be provided to the
purchaser since it is a part of the standard delivery.
The sensor installation is described in the separate >Installation Instructions for
Correlation and Doppler Sensors<. This document is part of the standard deliv-
ery and must be read necessarily prior to sensor installation.
Detailed information on how to operate the complete system can be found in the
accompanying instruction transmitter instruction manual.
