Technical Instructions for
Correlation Sensors
Page 18
Correlation Sensors – Rev. 07 as of 20.04.2016
®
Fig. 2-15
Type key for water-ultrasonic sensors, type CS2
CS2-
Type
Correlation sensor for large dimensions
V100
without level measurement
RP
Pipe sensor made of high resistant full PEEK; pipe body 1.4571
RX
Pipe sensor, special construction
SP
Rod sensor made of highly resistant full PEEK, pipe material 1.4571
V200
without level measurement
KT
Wedge sensor made of PPO with PEEK sensor face; ground plate 1.4571
V2H1
with ultrasound from bottom up for level measurement
KT
Wedge sensor made of PPO with PEEK sensor face; ground plate 1.4571
V2D0
with pressure measurement cell for level measurement
KT
Wedge sensor made of PPO with PEEK sensor face; ground plate 1.4571
V2U1
with pressure measurement cell and ultrasound from bottom up for level measurement
KT
Wedge sensor made of PPO with PEEK sensor face; ground plate 1.4571
Approval (ATEX)
0
none
E
Zone 1
Cable Length (max. 150 m / with pressure measurement cell up to 30 m)
10
10 m
15
15 m
20
20 m
30
30 m
50
50 m
99
100 m
XX
Special length upon request
Sensor Connection
K
Connection to OCM Pro CF, Type V20 and V2H
L
Connection to OCM Pro CF, Type V2D and V2U
R
for pipe sensors for connection to OCM Pro CF, Type V10
F
S
Pipe Length
0
(only for wedge sensor)
2
20 cm (standard)
3
30 cm (minimum length for stop ball valve)
4
40 cm (minimum length for retractable fitting)
X
Special pipe length in dm, price per dm
G
20 cm + extension thread
CS2-
Connection to PCM Pro and PCM 4 for type V2D and V2U,
incl. plug and replaceable filter element
Connection to PCM Pro and PCM 4 for type V20 and V2H,
incl. plug
