Technical Instructions for
Correlation Sensors
®
Correlation Sensors – Rev. 07 as of 20.04.2016
Page 45
Fig. 5-18
Pushing the protection hose over the cable
Fasten the protective cover again by using the 4 screws subsequently.
Fig. 5-19
Fastening the protective cover
5.6
Plug wiring and Sensor Cable
1
UE (voltage input, max. 9.9V)
2
RxTx + (RS485)
3
not connected
4
not connected
5
RxTx - (RS485)
6
UE-GND (power supply ground)
7
shield (cable shield)
Fig. 5-20
Plug wiring water-ultrasonic sensors (POA, CS2)
