Technical Instructions for
Correlation Sensors
Page 10
Correlation Sensors – Rev. 07 as of 20.04.2016
®
2.5
Device Identification
The instructions in this manual apply only for the type of sensor or the units de-
picted on the title page.
The article number can be found where the cable enters the sensor body as well
as on a nameplate on the end of the cable. This nameplate is protected against
weathering and abrasion by using a transparent shrunk-on hose and contains
the following:
-
name and address of manufacturer
-
CE label
-
type and serial number
-
year of manufacture
-
Ex label (on Ex-version sensors only) as mentioned in chapter 3.2.
In case of enquiries and ordering replacement parts it is important to specify ar-
ticle number as well as the serial number of the respective transmitter or sensor.
This ensures correct and quick processing.
ë
You can find the declaration of conformity at the end of this manual.
Fig. 2-1
Nameplate flow velocity sensor, type CSM
Fig. 2-2
Nameplate flow velocity sensor, type CSMD
