www.nitronic.ch
-
34 -
Nitronic AG
Mattenstrasse 11
CH – 2555 Bruegg
Tel.
+41 32 373 7070
Switzerland
Fax
+41 32 373 70
75
•
Move carriages (A) and (B) to the backmost posi-
tion (Fig. 15).
•
Loosen locking nuts (A) of the wire catchers (B)
slightly (Fig. 16 and Fig. 17).
•
Loosen set screws (10) slightly and push stripping
blades (12) out of the center completely outwards (Fig.
16 and Fig. 17).
•
Loosen set screws (23) of eccentrics (24) so that they
are still moderately tight but can still be rotated.
•
Rotate the two eccentrics (24) so that the centralizers
(13) are moved to the outermost position (Fig. 17).
Fig. 15. Positioning carriage
Fig. 16. Shift stripping blades out-
wardly
Fig. 17. Adjusting the centralizers
with the eccentric
