General Information
15
Service Manual – SC3000
Technical Data
General technical data
Description
Nilfisk BR 652
Advance SC3000
Nilfisk BR 752
Nilfisk BR 752C
Cleaning width
26 in (660 mm)
30 in (710 mm)
30 in (710 mm)
Squeegee width
35 in (890 mm)
Solution/clean water tank capacity
21 US gal (80 L)
Solution flow
0.26 ÷ 0.8 US gal/min. (1 ÷ 3 L/min.)
Recovery tank capacity
21 US gal (80 L)
Minimum/maximum solution flow (with and without EcoFlex™
system)
0 ÷ 0.8 US gal/min. (0 ÷ 3 L/min.)
EcoFlex™ kit tank capacity
1.3 US gal (5 L)
EcoFlex™ kit detergent flow setting
Ratio 1:400 ÷ 1:33 (0.25% ÷ 3%)
Rear wheel diameter
9.8 in (250 mm)
Front wheel specific pressure on the floor (*)
72 psi (0.5 N/mm
2
)
Rear wheel specific pressure on the floor (*)
130 psi (0.9 N/mm
2
)
Front steering, driving and braking wheel diameter
8.8 in (225 mm)
Vacuum system motor power
0.56 hp (420 W)
Drive system motor power
0.4 hp (300 W)
Maximum speed
3.7 mi/h (6 km/h)
Maximum gradient when working
2% (1.14°)
Sound pressure level at workstation
(ISO 11201, ISO 4871, EN 60335-2-72) (LpA)
65 dB(A) ± 3 dB(A)
Machine sound pressure level
(ISO 3744, ISO 4871, EN 60335-2-72) (LwA)
82 dB(A)
Vibration level at the operator's arms
(ISO 5349-1, EN 60335-2-72)
< 98.4 in/s
2
(< 2.5 m/s
2
)
Vibration level at the operator's body
(ISO 2631-1, EN 60335-2-72)
3.1 in/s
2
(0.8 m/s
2
)
Battery compartment size (length x width x height)
14.9 x 21.2 x 11.8 in (380 x 540 x 300 mm)
Battery type
4 6V batteries, 180 Ah C5 (WET)
4 6V batteries, 180 Ah C5 (GEL/AGM)
Standard batteries autonomy
2.5 - 3.5 hours
Total electrical input
60 A
Machine height
46.8 in (1,190 mm)
Machine maximum length
53.5 in (1,360 mm)
Machine width without squeegee
26.4 in (670 mm)
29.4 in (748 mm)
31.9 in (810 mm)
Vacuum performance
0.0098 MPa (1,000 mmH
2
O)
(*) Machines have been tested under the following conditions:
◦ With operator on board (165.3 lb - 75 kg)
◦ Maximum battery size
◦ Maximum brush and squeegee size
◦ Full clean water tank
◦ Optional components installed
◦ Weight on wheels checked
◦ Print on the floor checked on cement for each single wheel
◦ Result expressed as maximum value for front and rear wheels
Содержание SC3000
Страница 4: ...Table of contents 4 Service Manual SC3000 ...
