INSTRUCTIONS FOR USE
20
33015122(1)2006-02
(1): or every 6 months
(2): maintenance to be performed by Lombardini authorized Service Center
(3): or every two years
(4): after 5,000 hours
(5): after 10,000 hours
(6): for the procedure see the Service Manual, at any Nilfisk-Advance Service Center.
(7): every year, if the machine is not frequently used.
(8): if a lower-quality oil is used, change it every 125 hours.
HOPPER, FILTER AND SUCTION PIPE CLEANING, GASKET CHECK AND SUCTION FAN
BEARING LUBRICATION
Preliminary operations
1.
Empty the hopper (12, Fig. G), drive the machine to a cleaning/washing appointed area, then engage the parking brake
(7, Fig. E).
2.
Lift and dump the hopper (12, Fig. G), according to the procedure shown in the relevant paragraphs.
3.
Install the hopper door support rod (8, Fig. F).
Hopper cleaning (after every use)
4.
Clean the hopper (2, Fig. O) with pressurized water (1).
5.
Carefully check the suction sealing gasket (3) for integrity, and replace it if necessary.
Engine fuel filter replacement
(7)
Nut and screw tightening and
leakage check
(6)
(6)
Lubrication
(6)
Engine coolant line sleeve check
(7)(6)
Drive system pump oil filter
replacement
(6)
(6)
Hydraulic system oil drain filter and
tank breather filter replacement
(6)
(6)
Hydraulic system oil suction filter
replacement
(6)
(6)
Alternator belt replacement
(3)(6)
Cab air filter replacement
(1)
Injector calibration and cleaning
(2)(3)(6)
Climate control system belt
replacement
(6)
Engine coolant replacement
(3)(6)
Hydraulic system oil change
(3)(6)
Brake system check
(6)
Hydraulic pump pressure check
(6)
Minor engine overhaul
(2)(4)(6)
Major engine overhaul
(2)(5)(6)
WARNING!
Protect body parts (eyes, hair, hands, etc.) properly, when performing cleaning operations using
compressed air or water gun.
Maintenance
Running-in
period (after
the first 50
hours)
Every 10
hours or
before use
Every 200
hours
Every 600
hours
Every 1,200
hours
Every 2,400
hours
Long
periods
https://harrissupplyind.com - To Order Parts Call 608-268-8080