manualshive.com logo in svg

Nilfisk-Advance CA 551, Руководство по обслуживанию

Поделиться
Скачать
Nilfisk-Advance CA 551 Скачать руководство пользователя страница 82

RECOVERY WATER SYSTEM

ENGLISH

SERVICE MANUAL

80

909 6756 000(

5)2010-03

BA 451 / BA 451D / BA 531 / BA 531D / BA 551 / BA 551D / BA 551CD / BA 611D

CA 451 / CA 531 / CA 551

VACUUM SYSTEM MOTOR DISASSEMBLY/ASSEMBLY (All models)

Disassembly

If the tank (21) contains recovery water:

1. 

-  Drive the machine to the appointed recovery water disposal area.

-  (For 

BA 451D, BA 531D, BA 551D, BA 551CD, BA 611D

) Turn the ignition key (80) to “0”.

-  (For 

BA 451, BA 531, BA 551

) Turn off the switches (71) and (73).

-  (For 

CA 451, CA 531, CA 551

) Disconnect the power supply cable (59) from the electrical mains.

-  Empty the recovery water tank (21) with the hose (16).

Drive the machine on a level floor.

2. 

-  (For 

3. 

BA 451D, BA 531D, BA 551D, BA 551CD, BA 611D

) Turn the ignition key (80) to “0”.

-  (For 

BA 451, BA 531, BA 551

) Turn off the switches (71) and (73).

-  (For 

CA 451, CA 531, CA 551

) Disconnect the power supply cable (59) from the electrical mains.

(For 

4. 

BA 451, BA 451D, BA 531, BA 531D, BA 551, BA 551D, BA 551CD, BA 611D

) Disconnect the battery connector (12).

(For 

5. 

CA 451, CA 531, CA 551

) Remove the retaining plate (61) of the tank (40).

Grasp the handle (41) and carefully lift the tank (40).

6. 

Remove the screws (A) and recover the washers.

7. 

Remove the motor cover (B).

8. 

Remove the filter (C) and the gasket (D).

9. 

Remove the motor (E) or (L), the sound-deadening pipe (F) and the sound-deadening panel (G).

10. 

-  (For 

11. 

BA 451, BA 451D, BA 531, BA 531D, BA 551, BA 551D, BA 551CD, BA 611D

) Disconnect the electrical  

 

connector (H) of the motor (E).

-  (For 

CA 451, CA 531, CA 551

) Disconnect two electrical connections (J) and (K) of the motor (L).

Check the efficiency of the gasket (I) and, if necessary, replace it.

12. 

Assembly

Assemble the components in the reverse order of disassembly, and note the following:

13. 

If necessary, clean the filter (C) before assembling it (see the procedure in the relevant paragraph).

• 

WARNING!

(For CA 451, CA 531, CA 551) When the maintenance/repair procedure is completed, the tank (40) must always 

be locked with the plate (61).

Содержание CA 551

























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды