Nilfisk-Advance CA 551 Скачать руководство пользователя страница 7

Страница: 7 / 120

GENERAL INFORMATION

SERVICE MANUAL

ENGLISH

BA 451 / BA 451D / BA 531 / BA 531D / BA 551 / BA 551D / BA 551CD / BA 611D

CA 451 / CA 531 / CA 551

909 6756 000(

5)2010-03

SAFETY

The following symbols indicate potentially dangerous situations. Always read this information carefully and take all necessary

precautions to safeguard people and property.

SYMBOLS

DANGER!

It indicates a dangerous situation with risk of death for the operator.

WARNING!

It indicates a potential risk of injury for people or damage to objects.

CAUTION!

It indicates a caution related to important or useful functions.

Pay careful attention to the paragraphs marked by this symbol.

NOTE

It indicates a remark related to important or useful functions.

CONSULTATION

It indicates the necessity to refer to the User Manual before performing any procedure.

GENERAL INSTRUCTIONS

Specific warnings and cautions to inform about potential damages to people and machine are shown below.

DANGER!

This machine must be used by properly trained operators only. Children or disabled people cannot use this

–

machine.

Do not wear jewels when working near electrical components.

–

Do not work under the lifted machine without supporting it with safety stands.

–

Do not operate the machine near toxic, dangerous, flammable and/or explosive powders, liquids or

–

vapours: This machine is not suitable for collecting dangerous powders.

DANGER! (For BA 451, BA 451D, BA 531, BA 531D, BA 551, BA 551D, BA 551CD, BA 611D)

Before performing any cleaning, maintenance, repair or replacement procedure disconnect the battery

–

connector and remove the ignition key.

Keep the battery far from sparks, flames and incandescent material. During the normal operation explosive

–

gases are released.

Battery charging produces highly explosive hydrogen gas. Keep the tanks lifted during battery charging

–

and perform this operation in well-ventilated areas and away from naked flames.

DANGER! (For CA 451, CA 531, CA 551)

Always disconnect the power supply cable when the machine is not in use, before performing maintenance

–

procedures, before replacing the brush/pad-holder and before opening any access panel.

Содержание CA 551

























































































































Результаты поиска

Содержание CA 551

Отзывы:

Бренды по названию

Популярные бренды

Nilfisk-Advance CA 551, Руководство по обслуживанию

Результаты поиска

Содержание CA 551

Отзывы:

Бренды по названию

Популярные бренды