![background image](http://html1.mh-extra.com/html/niko/10-850/10-850_manual_1689562062.webp)
EN nv
Niko
sa Industriepark West 40, BE-9100 Sint-Niklaas, Belgium — tel. +32 3 778 90 00 — fax +32 3 777 71 20 — e-mail: [email protected] — www.niko.eu
10-850
62
Cause of the problem
Red status LED
Yellow status LED
Error tone
Solution
The a and P conductors are
switched or short-circuited.
switches on once
off
Switch the a and P
conductors or solve the
short-circuit.
The device returns to
resting mode.
The a conductor is not
connected or is not
receiving any power.
flashes quickly
on
Connect the a conductor or
check the connection to the
power supply.
The device returns to
resting mode.
There are various versions
of the telephone interface
connected to the same
number.
switches on twice with a
long pause
off
- Press the RESET key
to reset the telephone
interface.
- Change the number of the
telephone interface.
There are identical versions
of the telephone interface
connected to the same
number.
switches on three times
with a long pause
off
- Press the RESET key
to reset the telephone
interface.
- Change the number of the
telephone interface.
8. TECHNICAL DATA
dimensions
90 x 105 x 70 mm (HxWXD)
weight
230 g
sensor input
potential-free N.O. contact (max. 50 Ω)
actuator output
potential-free N.O. or N.G. contact
power supply voltage
+ 26 Vdc
input current in resting mode
three-wire: I(a) = 0.03 mA – I(P) = 9 mA
maximum input current
I(Pmax) = 50 mA
ambient temperature
0 – 40°C
9. WARNINGS REGARDING INSTALLATION
-The installation should be carried out by a registered installer and in compliance with the statutory regulations.
-This manual should be presented to the user. It should be included in the electrical installation file, and it should be passed on to any new owners.
Additional copies are available on the Niko website or via the Niko support service. The latest manual for this product is available on the Niko website at any
time.
-During installation, the following should be taken into account (non-exhaustive list):
- the statutory laws, standards and regulations.
- the technology currently available at the time of installation.
- this user manual, which only states general regulations and should therefore be read within the scope of each specific installation.
- the rules of proper workmanship.
This product complies with all of the relevant European guidelines and regulations. If applicable, you can find the EC declaration of conformity regarding
this product at www.niko.eu.
10. NIKO SUPPORT
In case of doubt or for the specific exchange procedure in case of a possible defect, contact the Niko support service in Belgium at +32 3 778 90 80 or
your wholesaler/installer. Contact details and more information can be found at www.niko.eu under the “Help and advice” section.