![background image](http://html1.mh-extra.com/html/niko/10-850/10-850_manual_1689562058.webp)
EN nv
Niko
sa Industriepark West 40, BE-9100 Sint-Niklaas, Belgium — tel. +32 3 778 90 00 — fax +32 3 777 71 20 — e-mail: [email protected] — www.niko.eu
10-850
58
5.16. Setting telephone numbers for day and night modes
You can program one telephone number for use during the day and another for use during the night.
To assign a telephone number to a telephone address, consult section 5.4.
Setting telephone numbers for the day and night modes
Step
Action
Result
1.
Activate programming mode.
2.
Enter the key combination:
28 XX YY
✱
where:
- XX = telephone address of the telephone to be called during the
day
- YY = telephone address of the telephone to be called during the
night
You have programmed one telephone number for use during the day
and another for use during the night.
3.
Exit the programming mode.
• Example of a set-up: 28 10 11
✱
If you have programmed telephone address 10 to a bell push button:
- the telephone number for the day mode is called if the contact on the sensor input is opened.
- the telephone number for the night mode is called if the contact on the sensor input is closed.
If you have programmed telephone address 11 to a bell push button, the telephone number that is programmed to telephone address 11 is
always called after the bell push button is pressed.
5.17. Setting the sensor input function for the day and night modes
You can use the day and night modes for a door call. By closing or opening a switching contact (such as a switch, a time switch or a Niko Home
Control contact), the telephone number for the day or night mode, respectively, is called (see section 5.16.).
Setting the sensor input function for the day and night modes
Step
Action
Result
1.
Activate programming mode.
2.
Enter the key combination:
24 2
✱
You have set the sensor input function for the day and night modes.
3.
Exit the programming mode.
5.18. Setting the external unit-to-telephone ring time
Upon delivery, the ring time from an external unit to a telephone is set to 30 seconds (= YY).
When you press the bell push button at the external unit, you hear a ring tone at the programmed internal unit. The telephone keeps ringing for a
maximum of 30 seconds. If you have activated the call diversion function (see section 5.15.), the call is diverted after 30 seconds to the second
telephone to be called (successor). This device will then also ring for 30 seconds.