Night Owl H5 NVR SERIES, Руководство пользователя

Страница: 62 / 80

62 H5 NVR Series
Users Manual
4. DNS1 and DNS2 fields are auto-populated in most cases, if they are not they
need to be set as follows: DNS1: [Gateway] DNS2: 8.8.8.8.
5. Click the Save button to apply all changes.
6. Reboot or power cycle the NVR.
NOTE:
Write these addresses down in the User Information section at the end of
the manual for future reference.
8.3.2 Mac
®
Operating System
Make sure that the NVR is properly connected to the router/modem.
Follow these steps to determine basic information about your network:
1. Select the Airport icon on your computer screen and choose the “Open
Network Preferences” option.
2. Choose Ethernet and select the Advanced button in the lower right corner.
3. Select the TCP/IP tab at the top to display your computer’s network
information.
4. Write down the “IPv4 address.“
5. Change the last three digits of the address to 150 and write this address down
as well e.g. 192.168.1.150. This will become the IP address of your NVR at a
later time.
6. Make note of the IP address listed for router. You will need to enter this into
the NVR network settings.