Night Owl H5 NVR SERIES, Руководство пользователя, Страница: 60 / 80

60 H5 NVR Series
Users Manual
8.3
Network Configuration
8.3.1 Windows
®
Operating System
Make sure that the NVR is properly connected to the router/modem and that you
have a computer that works with Windows and connected to the same router.
Follow these steps to determine the basic information about your network:
1. Press the Windows and R key at the same time on your computer’s keyboard to
bring up the Run window. Type “cmd” and press the Enter key.
2. In the command prompt window, type “ipconfig” and press Enter . Find
the section named “Ethernet adapter Ethernet” or “Wireless LAN adapter
Wi-Fi” and locate the “IPv4 Address” and write this address down e.g.
192.168.1.123.
3. Change the last three digits of the address to 150 and write this address down
as well e.g. 192.168.1.150. This will become the IP address of your NVR at a
later time.
4. Find “Default Gateway” in the same section and write this number down
as well e.g. 192.168.1.1. You will need to enter this in the NVR network
settings.