Night Owl H5 NVR SERIES, Руководство пользователя

Страница: 19 / 80

19 Chapter 4:
Camera Installation (images may vary)
Connect all cameras locally before final placement to
ensure that all components function properly.
4.2
Mounting the Cameras
Camera distance from viewing/recording device.
The further the camera is from the NVR or
monitor, the higher the chances of signal
degradation. The camera’s power supply
should be located as near to the camera
as possible. When the distance exceeds
200’, the power level will drop resulting
in video degradation.
Do not place near high voltage wires or other sources of electrical interference.
Electrical interference will degrade the quality of the signal.
Place camera out of reach to avoid vandalism.
Avoid direct exposure to weather. Do not place the camera where rain or snow will
hit the lens directly nor should the camera be placed so that the sun or bright
light shines directly into the lens. Your camera is weatherproof, but it will not work
when submerged in water. Ensure that all power and video connections are not
directly exposed to water and are protected from the elements.
Mounting surface. The mounting surface must hold at least four times the
camera’s total weight.
1. Locate a camera and choose a location where you would like to mount the
camera.
2. Indicate screw positions by marking three holes on the surface where you plan
to mount the camera, using the holes in the camera base as a guide.
3. Using a drill bit slightly smaller than the included screw anchors, drill into the
mounting surface using the guide marks you placed in the previous step.