Nidek Medical LM-7, Руководство оператора

Страница: 72 / 108

70
4. CONNECTION AND SETTINGS : Operation when Peripheral Devices are Connected
4.1.2 Connecting AR/ARK/RKT
Measured data of the LM-7/LM-7P can be printed with the printer of the connected AR, ARK, or RKT.
Connect the NIDEK AR, ARK, or RKT to the communication port of the LM-7/LM-7P and set the
parameters.
●
Parameter setting procedure
1)
Set the communication related parameters of the LM-7/LM-7P.
For the setting procedure, see “4.2 Parameter Settings” (page 75) .
2)
Set the parameters of the connected device.
Connectable equipment
AR-600/330A series, ARK-700/530A series, AR-1/ARK-1 series, RKT-7700/
TONOREF II/TONOREF III
Parameter Setting contents
Printer AR print
Com mode NIDEK
Baud rate 9600
Parity Odd
Data bits 8bit
Stop bits 1bit
Connecting device Parameter Setting contents
AR/ARK series
IN port (LM) NIDEK
LM Data Prt. YES
Baud-Rate 9600
Bit Length 8
RKT-7700/TONOREF II/TON-
OREF III
BAUD-RATE 9600
BIT LENGTH 8
LM DATA PRINT YES
• For the setting procedure, refer to the operator's manual for the connected device.
• When printing with the AR, ARK, or RKT, the font is different from that printed with the LM-7/LM-
7P.
• The Print density, Paper cut, Auto cutter, Economy print, QR code, and PD layout parameters are
not supported.
For PD, only a value is printed, and spacing between lines is unchanged.
1707141668223 承認済
Uncontrolled copy when printed.