manualshive.com logo in svg

Nidek Medical LM-7, Руководство оператора

Поделиться
Скачать
Nidek Medical LM-7 Скачать руководство пользователя страница 10

8

1. SAFETY PRECAUTIONS : Usage Precautions

Maintenance

Disposal

CAUTION

• Only service personnel trained by NIDEK are allowed to repair and service the device.

NIDEK assumes no responsibility for any adverse events resulting from improper servicing.

• When performing maintenance work, secure a sufficient maintenance space.
• Take special care not to scratch the protective glass under the nosepiece.

Flaws on the glass substantially lower the reliability of measurement.

• Clean the protective glass under the nosepiece occasionally with a blower brush.

If dust settles on the protective glass, it may affect the measurement accuracy.

CAUTION

• Follow local governing ordinances and recycling plans regarding disposal or recycling of device com-

ponents.

It is recommended to entrust the disposal to a designated industrial waste disposal contractor.
Inappropriate disposal may contaminate the environment.

• When disposing of packing materials, sort them by material and follow local ordinances and recycling

regulations.

Inappropriate disposal may contaminate the environment.

1707141668223 承認済

Uncontrolled copy when printed.

Содержание LM-7













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды