Nidek Medical Lex 1000, Инструкция по установке и настройке

Страница: 20 / 28

18
Safety Bevel AXIS (Flat)
Adjustment Parameter :
Press and hold
（
STOP
）
, then press to go to Parameter screen. Select
Parameter setting, then press
.
Scroll the page to SFB (Page 8/12)
Axis Adjustment (Flt, Re)
：
0.00
Axis Adjustment (Fltl, Fr)
：
0.00
1. Call up internal 45 square. Use a CR39, -3Dto-5D lens then grind it in Nylor Flat with
SFB mode.
2. Check axis of front safety bevel. If it tilted in CW direction, please decrease the value.
If tilted in CCW direction, please increase the value. See the picture below.
Front
+ –
3. Check axis of rear safety bevel. If it tilted in CW direction, please increase the value.
If tilted in CCW direction, please decrease the value. See the picture below.
– +
Rear