Nidek Medical Lex 1000, Инструкция по установке и настройке, Страница: 7 / 28

5
1.2 Checking chuck pressure
Adjustment Parameter:
Press and hold
（
STOP
）
,
then press to go to Parameter screen. Select
Parameter setting, then press . Scroll page to Parameter setting (9/12 page)
*
Chuck pressure
（
CR39/HPL
）：
100
Chuck pressure
（
PC/ACR/TRX/PUR
）：
100
Chuck pressure
（
GLS
）：
100
1. Call up a JOB. Any job is OK.
2. Set the chuck pressure JIG into the machine, then press , then
（
START
）
.
3. When you press
（
START
）
a lens is chucked. Then press
（
STOP
）
to stop the
process. Measure chuck pressure. Proper chuck pressure is the following.
4. Chuck pressure
（
CR39/HPL
）
: 45kg+/-5kg
Chuck pressure
（
PC/ACR/TRX/PUR
）：
45kg+/-5kg
Chuck pressure
（
GLS
）：
45kg+/-5kg
If not in tolerance, change parameter value to adjust chuck pressure.
2. Calibration and Adjustment
Adjustment Order
2-1Calibration
2-2 Finish Size and Bevel Position Adjustment
2-3 AXIS Adjustment
2-4 Feeler Axis Adjustment
2-5 Polish Adjustment
2-6 Groove Adjustment
2-7 Safety Bevel Adjustment
2-8 High Curve grinding Adjustment
To call up internal 45 circle : Press and hold then press
To call up internal 45 square : Press and hold then press FC SW.
*
LEX1000 new software (V1.05 and later) has 16 menu pages. Menu pages 14~16 are LEX Drill parameters.