Nidek Medical Lex 1000, Инструкция по установке и настройке

Страница: 17 / 28

15
Groove AXIS
Adjustment Parameter :
Press and hold
（
STOP
）
,
then press to go to Parameter screen. Select
Parameter setting, then press . Scroll the page to Axis Adjustment (Page 6/12)
CR39/HPL, Grv
：
0.00
PC/ACR/TRX/PUR, Grv
：
0.00
1. Call up internal 45 square. Use a CR39, -3D to -5D lens then grind it in Nylor Guide
(Depth 0.0) mode.
2. The grooving wheel barely touches the lens and you see a slight groove evenly over
entire lens circumference. View the front side of lens. If the right side is deeper,
please decrease the value. If the left side is deeper, please increase the value.
3. Also try a PC lens and check Groove Axis. It is the same procedure.
+ –
Front
Groove