Nidek Medical LE-9000DX Express, Руководство оператора

Страница: 83 / 153

4 - 53
4.6 Checking the Lens Size
Check the lens size after processing is completed. If the lens is too large, retouch it to correct the
size.
4.6.1 Checking the lens size
Fit the lens in the rim and measure the gap at the rim joint.
NOTE
• Do not remove the cup yet, otherwise the
lens cannot be retouched.
4.6.2 Retouching lenses
If the finished size of the lens is too large to fit into the rim, perform retouching.
1. Change the
SIZ
value with .
No values other than
SIZ
can be changed.
Reference guide for size correction:
Subtract one-third of the gap size at
the rim joint from the
SIZ
value.
e.g. For the gap of 1 mm:
1/3 × 1 (mm) = approx. 0.3 (mm)
Subtract 0.3 from the
SIZ
value.
2. Set the lens to the adapter.
Align the top mark ( • ) on the cup with that of
the adapter to reset the lens. Then, press
to fix the lens.
3. Start retouching.
Close the soundproof cover and press .
4. After the process, check the lens size again.
If the finished lens is still large, retouch it again.
Top mark
Top mark
㧚ޓ
㧚ޓ
ޓ㧚
㧚ޓ
㧹㧵㧺ޓޓ㧢㧡
㧲㧼㧰㧦㧢㧥㧜㧜ޓޓޓޓޓޓޓޓ 㧲㧼㧰㧦㧢㧥㧜㧜ޓޓޓޓޓޓޓޓ
㧼㧰 㧼㧰ޓ㧦㧢㧞㧜㧜ޓޓޓޓޓޓޓޓ 㧦㧢㧞㧜㧜ޓޓޓޓޓޓޓޓ
ޓޓޓ㧦ޓޓ㧞㧜ޓޓޓޓޓޓޓޓ ޓޓޓ㧦ޓޓ㧞㧜ޓޓޓޓޓޓޓޓ
㧿㧵㨆 㧿㧵㨆 㧦㧙㧜㧟㧜ޓޓޓޓޓޓޓޓ 㧦㧙㧜㧟㧜ޓޓޓޓޓޓޓޓ
㧭㧯㨀ޓޓޓޓޓޓޓޓޓޓޓޓޓ 㧭㧯㨀ޓޓޓޓޓޓޓޓޓޓޓޓޓ
㧹㧱㧹 㧹㧱㧹㧦ޓޓޓޓޓޓޓޓޓ 㧦ޓޓޓޓޓޓޓޓޓ
㧼㧸㧭 㧼㧸㧭㧹㨀㧸㧭㨁㨀ޓޓޓޓޓ 㧹㨀㧸㧭㨁㨀ޓޓޓޓޓ 㧾
Gap