Nidek Medical LE-9000DX Express, Руководство оператора

Страница: 71 / 153

4 - 41
7. Check the groove section.
1) Press to turn off the cursor.
2) Simulate the whole groove to see if the
desired groove is obtained. See Step 5 on
page 4-39.
8. Repeat Steps 5 - 7 until the desired groove is
obtained.
9. Start processing.
Press .
Roughing
↓
Finishing
↓
Polishing (Only when is selected with Type PL4, PLB or PLB-2R.)
↓
Grooving
↓
Chamfering (Only when is selected.)
↓
Processings are complete. [The Layout screen returns.]
* The processing order may change according to the lens material.
10. Remove the lens.
WARNING
• Open the soundproof cover after making sure that the wheels have stopped completely.
• Release the chuck by pressing after making sure that the wheels have stopped
completely.
If the chuck is released before the wheels have stopped completely, when a lens is
dropped, it may contact the turning wheels and its scattering may cause an injury.
NOTE
• When a lens, which is difficult to process or whose edge is thick, is polished a part of
the lens edge may remain unpolished.
In such cases, retouch the lens without changing the size compensation value.
See “4.6.2 Retouching lenses” (p. 4-53).
ޓ
ޓ
ޓ
ޓ㧚
ޓ㧚
ޓ㧚
ޓ㧚
㧳%48 %48㧦㧭ޓ㧡㧜 㧦㧭ޓ㧡㧜
㧼㧺㨀㧦ޓޓ㧜㧡ޓޓޓޓޓޓޓޓ 㧼㧺㨀㧦ޓޓ㧜㧡ޓޓޓޓޓޓޓޓ
㧰㧱㧼㧦ޓޓ㧜㧢 㧰㧱㧼㧦ޓޓ㧜㧢
㨃㧵㧰㧦ޓޓ㧜㧢㧳㨁㧵ޓޓޓޓ㧾 㨃㧵㧰㧦ޓޓ㧜㧢㧳㨁㧵ޓޓޓޓ㧾