Nidek Medical LE-9000DX Express Скачать руководство пользователя страница 65

Страница: 65 / 153

4 - 35

4. Start processing.

Press

Lens shape measurement

↓

Roughing

↓

Finishing

↓

Polishing (Only when

is selected with Type PL4, PLB or PLB-2R.)

↓

Chamfering (Only when

is selected.)

↓

Processings are complete. [The Layout screen returns.]

* The processing order may change according to the lens material.

5. Remove the lens.

WARNING

• Open the soundproof cover after making sure that the wheels have stopped completely.

• Release the chuck by pressing

after making sure that the wheels have stopped

completely.

When the chuck is released before the wheels have stopped completely, if a lens is
dropped, it may contact the turning wheels and its scattering may cause an injury.

NOTE

• When a lens, which is difficult to process or whose edge is thick, is polished, a part of

the edge may remain unpolished.

In such a case, retouch the lens without changing the size compensation value. See
“4.6.2 Retouching lenses” (p. 4-53).

Содержание LE-9000DX Express


























































































































































Результаты поиска

Содержание LE-9000DX Express

Отзывы:

Nidek Medical LE-9000DX Express, Руководство оператора, Страница: 65 / 153

Результаты поиска

Содержание LE-9000DX Express

Отзывы: