Nidek Medical LE-9000DX Express, Руководство оператора

Страница: 117 / 153

8 - 16
8.8 Adjusting the Axis Shift
8.8.1 Adjusting the axis shift for unpolished lenses
When the finished axis angle of a lens is shifted from the designated angle, adjust it as follows.
1. Call up the MENU screen.
Press .
2. Call up the AXIS adjustment screen.
Align the pointer (
→
) to “AXIS adjustment”
and press .
3. Adjust the axis angle.
With polycarbonate and other lenses, adjust the axis angle separately for each processing type:
beveling (Auto, Guided, and EX) and flat edging (Flat/Rimless).
Item
• For beveling of polycarbonate or trivex lenses: PC AXS const. (bevel)
• For flat edging of polycarbonate or trivex lenses: PC AXS const. (flat)
• For beveling of glass lenses (except for Type PLB) GLS AXS const. (bevel)
• For flat edging of glass lenses (except for Type PLB) GLS AXS const. (flat)
• For beveling of lenses other than polycarbonate, trivex or glass: PLA AXS const. (bevel)
• For flat edging of lenses other than polycarbonate, trivex or glass: PLA AXS const. (flat)
Add the compensation value to the AXIS constant value indicated on the screen to adjust the
axis angle.
e.g.
If the finished axis angle became 1º while the
prescribed angle was 180º, add 1.00 to the
present value.
Setting value: +2.00
→
+3.00
e.g.
If the finished axis angle became 179º while
the prescribed angle was 180º, subtract 1.00
from the present value.
Setting value: +2.00
→
+1.00
180º
179º
1º
180º
㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖
㧖ޓޓޓޓޓޓޓ㧭㨄㧵㧿ޓ㨍㨐㨖㨡㨟㨠㨙㨑㨚㨠ޓޓޓޓޓޓޓޓ㧖
㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖
ޓޓޓޓޓޓޓޓޓޓޓ㧖㧱㨄㧵㨀ޓ㧦ޓ㧼㨞㨑㨟㨟ޓ㧿㧱㧸㧱㧯㨀ޓ
ޓ ψ 㧼 㧸 㧭 ޓ 㧭 㨄 㧿 ޓ 㨏 㨛 㨚 㨟 㨠 㧚 㧔 㨎 㨑 㨢 㨑 㨘 㧕 ޓ 㧦 ޓ 㧜 㧚 㧜 㧜
ޓ ޓ 㧼 㧸 㧭 ޓ 㧭 㨄 㧿 ޓ 㨏 㨛 㨚 㨟 㨠 㧚 㧔 㨒 㨘 㨍 㨠 㧕 ޓ ޓ 㧦 ޓ 㧜 㧚 㧜 㧜
ޓ ޓ 㧼 㧯 ޓ 㧭 㨄 㧿 ޓ 㨏 㨛 㨚 㨟 㨠 㧚 㧔 㨎 㨑 㨢 㨑 㨘 㧕 ޓ ޓ 㧦 ޓ 㧜 㧚 㧜 㧜
ޓ ޓ 㧼 㧯 ޓ 㧭 㨄 㧿 ޓ 㨏 㨛 㨚 㨟 㨠 㧚 㧔 㨒 㨘 㨍 㨠 㧕 ޓ ޓ ޓ 㧦 ޓ 㧜 㧚 㧜 㧜
ޓ ޓ 㧳 㧸 㧿 ޓ 㧭 㨄 㧿 ޓ 㨏 㨛 㨚 㨟 㨠 㧚 㧔 㨎 㨑 㨢 㨑 㨘 㧕 ޓ 㧦 ޓ 㧜 㧚 㧜 㧜
ޓ ޓ 㧳 㧸 㧿 ޓ 㧭 㨄 㧿 ޓ 㨏 㨛 㨚 㨟 㨠 㧚 㧔 㨒 㨘 㨍 㨠 㧕 ޓ ޓ 㧦 ޓ 㧜 㧚 㧜 㧜