manualshive.com logo in svg

Nidek Medical LE-9000DX Express, Руководство оператора, Страница: 74 / 153

Поделиться
Скачать
Nidek Medical LE-9000DX Express Скачать руководство пользователя страница 74

 4 - 44

6. Start processing.

Press 

.

Roughing

↓

Finishing

↓

Polishing (Only when 

 is selected with Type PL4, PLB or PLB-2R.)

↓

Grooving

↓

Chamfering (Only when 

 is selected.)

↓

Processings are complete. [The Layout screen returns.]

* The processing order may change according to the lens material.

7. Remove the lens.

WARNING

• Open the soundproof cover after making sure that the wheels have stopped completely.

• Release the chuck by pressing 

 after making sure that the wheels have stopped

completely.

When the chuck is released before the wheels have stopped completely, if a lens is
dropped, it may contact the turning wheels and its scattering may cause an injury.

NOTE

• When a lens, which is difficult to process or whose edge is thick, is polished, a part of

the edge may remain unpolished.

In such cases, retouch the lens without changing the size compensation value.  See
“4.6.2 Retouching lenses” (p. 4-53).

Содержание LE-9000DX Express


























































































































































Отзывы:

Нет отзывов