Nidek Medical LE-700, Руководство по установке, Страница: 51 / 80

45
CHECK AND ADJUSTMENT PROCEDURES: Size Check and Adjustment
6
Press Circle 45 .
The processing condition screen appears.
7
Specify each processing condition.
1)
Set each item as follows:
•
For flat edge polishing
“Material”
→ CR39
“Type” → Single
“Frame” → Flat
“Soft” → None
“Polish” → Exec
“Layout” → Passive
“FC”
→
None
•
For bevel polishing
“Material”
→ CR39
“Type” → Single
“Frame” → Metal
“Bevel position” → Auto
“Soft” → None
“Polish” → Exec
“Layout” → Passive
“FC” → None
2)
Press .
The layout screen appears.
8
Continue the processing method on the layout screen using the same procedures
explained by the following steps starting from size setting.

“3.5.1 Size check” (page 27) - (Step 5) to (Step 10)
9
Confirm that the lens edge is not left unpolished or burnt.

“3.8.1 Polishing check” (page 42) - (Step 6)
10
Repeat (Step 1) to (Step 9) until no polished or burnt portions are left.