Nidek Medical LE-700, Руководство по установке

Страница: 33 / 80

27
CHECK AND ADJUSTMENT PROCEDURES: Size Check and Adjustment
3.5 Size Check and Adjustment

Adjust size on the parameter so that the outer diameter of the lens flat edged using Circle 45 is within
the tolerance of
φ 45.0±0.1 mm.
3.5.1 Size check
1
Enter service mode from the LE-700 home screen.

“3.2.1 Entering service mode” (page 20)
2
Press the “Maintenance” tab.
The maintenance screen appears.
3
Press Circle 45
.
The processing condition screen appears.
4
Specify the flat edging conditions.
1)
Set each item as follows:
“Material” → CR39
“Type” → Single
“Frame” → Flat
“Soft” → None
“Polish” → None
“Layout” → Passive
“FC” → None
2)
Press .
The layout screen appears.