Nidek Medical Ice 900, Руководство оператора

Страница: 84 / 144

74
OPERATING PROCEDURES : Setting Processing Conditions and Entering Layout Data
5
Enter the height of the eye point.
Press the PD (or BT ) numeric
button to display the ten-key pad.
Enter any value and press the
but-
ton.
The numeric value can also be
entered by the jog dial.
For details, see “1.3.8 Ten-key pad screen” (page 25).
6
When blocking the lens based on the hidden marking, enter the EP value.
Pressing the EP numeric button displays the ten-key pad. Enter any value and press the
button.
The range is 0.0 to 6.0 mm in increments of 0.1 mm.
The numeric value can also be entered by the jog dial.
The numeric value can be entered in increments of 0.5 mm.
For details, see “1.3.8 Ten-key pad screen” (page 25).
When the EP value is entered, the far vision
eyepoint mark changes as shown in the fig-
ure.
For the WD, in accordance with the space
between the hidden markings, set the posi-
tion that is easily aligned.
Pressing the WD numeric button displays the ten-key pad. Enter any value and press the but-
ton.
The range is 15.0 to 45.0 mm in increments of 0.1 mm.
7
Enter the size (enlarged or reduced lateral based size of lens shape).
For details of this operation, see “7 Enter the size (enlarged or reduced lateral based size of lens
shape).” (page 74) of 2.5.3 Entering layout data for single vision lenses.
8
Select Active/Passive (Layout mode).
For details of this operation, see “6 Select Active/Passive (Layout mode).” (page 65) of 2.5.3 Enter-
ing layout data for single vision lenses.
EP
WD
• When blocking the lens based on the far vision eyepoint mark, it is not necessary to enter
the WD value.