Nidek Medical Ice 900, Руководство оператора

Страница: 52 / 144

42
OPERATING PROCEDURES : Operating Procedures
For processing conditions, see “2.5.1 Setting processing conditions” (page 51).
4
Specify the right (R) and left (L) of the lens layout.
For entering layout, see “2.5.3 Entering layout data for single vision lenses” (page 61) to “2.5.5
Entering layout data for progressive power lenses” (page 72).
5
Enter JOB#.
Enter JOB# if necessary.
1) Press JOB#/PTN# on the Layout
screen to display the keyboard
screen.
2) Enter JOB#.
If a barcode scanner is connected, scan
the barcode.
3) Press the button to store the
data.
6
Place the right-eye lens on the lens table
and block it.
For blocking procedures, see “2.8 Blocking” (page 95).
7
Block the left-eye lens.
8
Store the blocked lens in a tray or such marked with the JOB#.
Identify the stored lens as right or left.
• When blocking only the R (Right) lens with the initial screen set to L (Left), press the L
(Left) button to change the screen to R (Right) lens display.
JOB#/PTN#
Óáöå
• Processing conditions that differ between the right and left lenses cannot be set to the
same JOB#.
The processing conditions for the later blocking are saved to the JOB#.
• Repeated blocking of the same side lens, right or left, cannot be conducted.