Nidec POWERDRIVE FX 100T, Руководство по установке

Страница: 28 / 40

28
OPTIONS
POWERDRIVE FX Installation guide
4729 en - 2017.08 / c
5.2 - Add-on options
5.2.1 - Connector and shielding bracket
Px1 P1 P2 Px2 Px3
Connecteur
pour option
MDX-Bus de terrain
et/ou MDX-ENCODER
Etrier et colliers de blindage
pour le câblage des options de
retour capteur et bus de terrain
• To connect the optional modules to the drive control board
connector, remove the back plastic protective cover.
• The bracket for connecting the option shielding is supplied with
each option. To attach it, screw the bracket in the location indi-
cated below, placing it over the control cable shielding clamps
(the shielding clamp furthest to the right should be removed).
Shielding bracket for
optional modules
5.2.2 - Fieldbus, speed feedback and I/O
options
The control board is designed to be plugged with various
optional modules. Several options can be combined:
• Fieldbus options (see section 5.2.3)
• Speed feedback options (see section 5.2.4)
• I/O options (see section 5.2.5).
5.2.3 - Fieldbus options
Depending on the configuration of the speed feedback and
inputs/outputs optional modules, two types of fieldbus are
proposed.
MDX : option to be fitted
to the control board (white
color)
CM : compact module to
be integrated in an existing
MDX board
Association table:
Main option
Fieldbus
MDX version CM version
None X
MDX-ENCODER X
MDX-RESOLVER X
MDX-I/O Lite X
MDX I/O M2M X
MDX-E
MDX I/O M2M
X
MDX-RE
MDX I/O M2M
X
Fieldbus modules can be used to communicate with the
corresponding networks respective. They can be integrated
in and are supplied by the drive.
The following fieldbus are available on Powerdrive FX :
• MDX/CM-MODBUS : Modbus RTU (RS485/232)
• MDX/CM-ETHERNET : Modbus TCP (Ethernet)
• MDX/CM-ETHERNET-IP : EtherNet/IP
• MDX/CM-PROFIBUS : Profibus DP V1
• MDX/CM-PROFINET : ProfiNet
For more details, consult the specific documentations.