Nice MhouseKit WG2W, Инструкции и предупреждения по установке и использованию

Страница: 21 / 148

English
English – 19
FURTHER DETAILS
––– STEP 10 –––
10.1 - ADVANCED ADJUSTMENTS
10.1.1 - Parameter adjustment using radio transmitter
Using the radio transmitter you can adjust certain operating parameters
on the control unit: there are eight parameters (Table 9):
1)
Pause time: duration for which the leaves remain open (in the case of
automatic closure).
2)
Pedestrian opening: pedestrian opening mode of the leaves.
3) Motor force: maximum force above which the control unit detects an
obstacle, and reverses the movement.
4) “OPEN” function: sequence of movements associated to each “OPEN”
command.
5) Discharging Motor 1 when closing: adjusts the length of the “brief
reverse” of the motor after execution of the Close manoeuvre, in order
to reduce the final residual force.
6)
Discharging motor 1 when opening: adjusts the length of the “brief
reverse” of the motor after execution of the opening manoeuvre, in
order to reduce the final residual force.
7) Discharging motor 2 when closing: adjusts the length of the “brief
reverse” of the motor after execution of the Close manoeuvre, in order
to reduce the final residual force.
8)
Discharging motor 2 when opening: adjusts the length of the “brief
reverse” of the motor after execution of the opening manoeuvre, in
order to reduce the final residual force.
TABLE 9
Parameters N° Value Action: operation to be carried out at step 3 in the adjustment phase
Pause time
1° 10s Press T1 once
2° 20s (*) Press T1 twice
3° 40s Press T1 three times
4° 80s Press T1 four times
Pedestrian
opening
1° Open 1 leaf halfway Press T2 once
2° Fully open 1 leaf (*) Press T2 twice
3° 2 leaves partially opened to 1/4 of the full course Press T2 three times
4° 2 leaves partially opened to half of the full course Press T2 four times
Motor force
1° Low Press T3 once
2° Medium low (*) Press T3 twice
3° Medium high Press T3 three times
4° High Press T3 four times
“OPEN”
function
1° “Open”, “Stop”, “Close”, “Stop” Press T4 once
2° “Open”, “Stop”, “Close”, “Open” (*) Press T4 twice
3° “Open”, “Close”, “Open”, “Close” Press T4 three times
4° Open only Press T4 four times
(*) Original factory value
TABLE 10
Parameters N° Value Action to perform
Discharge on close
Motor 1
1° No discharge (*) Press T1 once
2° 0.1s (Minimum) Press T1 twice
3° Press T1 three times
4° Press T1 four times
5° 0.4s (Medium) Press T1 five times
6° Press T1 six times
7° Press T1 seven times
8° 0.7s (Maximum) Press T1 eight times
Discharge on open
Motor 1
1° No discharge (*) Press T2 once
2° 0.1s (Minimum) Press T2 twice
3° Press T2 three times
4° Press T2 four times
5° 0.4s (Medium) Press T2 five times
6° Press T2 six times
7° Press T2 seven times
8° 0.7s (Maximum) Press T2 eight times
Discharge on close
Motor 2
1° No discharge (*) Press T3 once
2° 0.1s (Minimum) Press T3 twice
3° Press T3 three times
4° Press T3 four times
5° 0.4s (Medium) Press T3 five times
6° Press T3 six times
7° Press T3 seven times
8° 0.7s (Maximum) Press T3 eight times
Discharge on open
Motor 2
1° No discharge (*) Press T4 once
2° 0.1s (Minimum) Press T4 twice
3° Press T4 three times
4° Press T4 four times
5° 0.4s (Medium) Press T4 five times
6° Press T4 six times
7° Press T4 seven times
8° 0.7s (Maximum) Press T4 eight times
(*) Original factory value