Nice HSTS2, Инструкции и предупреждения по установке и использованию

Страница: 13 / 94

English – 11
EN
Notice - Configuring the commands to be executed:
“ Type ” select whether to run a scenario, a group or a single automation
unit. (warning, the alarm system arming/disarming scenario cannot be run).
“ Name ” in the appearing list, select the name of the scenario, group or
individual automation unit to be run.
“ Command ”, specify the command to be run, if you chose to run a Group
or a single automation unit.
Confirm with “ OK ” to save and exit. ON : to define the activation start
time for the event notice;
OFF : to define the activation end time for the event notice;
Days : to define the days of the week when the event notice is enabled;
Voice Msg. : to associate a voice message that will be played by the touch
screen at the time of executing the notice.
05. Confirm with “ OK ” to save and exit.
To edit or delete a notice:
06.
Turn on the touch screen keypad, touch the icon in the main screen,
scroll through with and select to enter the “
Notice List
” menu;
07.
Touch the “
Notice
” you wish to edit or delete;
08.
To edit press “
Edit
” and resume from point 04;
09.
To delete, press “
Delete
”, confirm by selecting “
YES
” and pressing “
OK
”.
4.16 - Event log
This function displays a report of the last 100 commands sent.
01.
Turn on the touch screen keypad, touch the icon in the main screen,
scroll down and select the icon
02. Scroll through with the arrows
to view the events.
a - date
b - time
c - command origin: L - Locally from the touch screen / S - SMS / N - Event notice
T - Timer
d - name of the automation unit, scenario, group or timer run
e - name of the command sent
07/12/2011 07:58:36 L
GATE 1 OPEN
a b c
d e
TABLE 2
MESSAGE NO. EVENT DESCRIPTION
1 Alarm GENERAL ALARM: generated by one of the detectors. Generated by a zone A-B-C-D-E-F
2 Tampering TAMPERING ALARM: All tamper-proof devices can trip this alarm.
3 24H Panic PANIC ALARM: alarm activated manually by the user via transmitter or keypad.
4 24H Technical TECHNICAL ALARM: alarm activated by technical sensors (smoke, flooding, and others).
5 Pre-alarm PRE-ALARM: status where an intrusion was detected but the sensor is set with intervention delay. Time needed by
the user to deactivate the system without activating the sirens.
6 Detectors Detection generated by a specific sensor even with the system is not armed.
7 Activated Generates a notification when one or more partitions are activated.
8 Deactivated Generates a notification when one or more partitions are deactivated.