Nibe SPLIT AMS 10, Техническое руководство

Страница: 61 / 92

Factory setting for the relay board’s DIP switches
Comments AMS 10-16 AMS 10-12 AMS 10-8 Function Switch
See page 30 . X X - Pump down SW1
- - X Pump down SW9
Resets and restarts the board. X X X Reset SW2
May not be changed! off / open off / open - Model setting 1 or J1 JSW1
on / closed off / open - 2 or J2
off / open off / open - 3 or J3
off / open off / open - 4 or J4
Shorter time between de-
frosts. off off off Defrosting 1 SW3
The fan blows away snow
even if the compressor has
stopped. off off off Snow guard 2
May not be changed! - - off No function 3
Start/stop test operation. off off - Test operation off/on 3
May not be changed! - - on No function 4
Select operation mode for test
operation.
Off = Cooling operation. off off - Test operation cool-
ing/heating 4
May not be changed! on on on Japan/Export model 1 SW4
on on on 3-phase / 1-phase mod-
el 2
off off off Load measurement 3
- - off Function test electron-
ics 4
on on - Model setting 4
May not be changed! off off - Matching pipe 1 SW5
off on - Current limit 2
On = Short compressor start
delay. off off - Protected compressor
start 3
May not be changed! off off - Test 4
May not be changed! on on - No function J5 Jumper
on on - J6
on on - J7
May not be changed! - - off No function 1 SW7
- - off 2
- - off 3
May not be changed! - - off No function 1 SW8
- - off 2
On = Short compressor start
delay. - - off Protected compressor
start 3
INVERTER PCB
Factory setting for the inverter’s DIP switches
Comments AMS 10-16 AMS 10-12 AMS 10-8 Function Switch
May not be changed! off off off Miscellaneous 1 JSW10
off off off 2
off off off 3
off off off 4
May not be changed! off on on Model setting 1 JSW11
off off on 2
on off on 3
on on on 4
61 Chapter 6 | Troubleshooting NIBE AMS10