21
RCU 11
Web interface – FIGHTER 360P
Operating data
Operating data for several measured values is shown in
table format for easy viewing.
M1.0 shows that the equivalent menu in FIGHTER 360P is
1.0.
At S86 the status for the component numbered 86 in
FIGHTER 360P’s component list is shown.
To change a value, click on ”arrow down” and select a va-
lue from the scrolling list, confirm with ”Set”. After a few
seconds the change is confirmed by FIGHTER 360P and the
relevant value is updated.
The change in value presumes that the user has logged in
with writing or administration authority.
Operating data, extended
In this form the heat regulation parameters can be chan-
ged by clicking on ”arrow down” and selecting a value
from the scrolling list, confirming thereafter with ”Set”.
Note that the selected RCU offset heating curve is added to
the heat pump’s internal offset heating curve.
The change in value presumes that the user has logged in
with writing or administration authority.
