15
RCU 11
Starting
Logging in
Start the browser (such as Internet Explorer) and enter the
selected IP address in the RCU. If the
IP address is chosen for example to be 10.2.15.21, then
”http://10.2.15.21” is entered into the browser address
field, followed by pressing the Enter button.
The following or a similar image will be displayed:
To access the product’s internal web page for the first time,
enter “admin” into both entry fields. Another log in dia-
log can be shown depending on the Java version installed.
The password will be changed later, and new users can be
added (refer to the ”Web interface – Settings” > ”Users”
section).
If there is a problem logging in, check that ”Caps Lock” is
not activated for the keyboard.
Remember the heat pump must be configured for commu-
nication to the RCU. This is done on the service menus. See
the “Installation and Maintenance Instructions” for each
product.
The password for the web pages is diffe-
rent to the password for Netbiter Config
NOTE!
