NHProEquip TC-1300, Руководство пользователя

Страница: 23 / 36

22
Fig 7-14
7.2.4 Demount the bottom tire lip: Use the bead
breaker disk to rise up the tire from the bottom of
the bead（Fig7-15）. Demount the bottom tire lip
（Fig7-16）as per step 5.1.5.
7.2.5 Mount tire
First refer to steps（5.2.1）～（5.2.3）, mount the
bottom tire lip. Use the tire presser to press down
the tire lip as shown in Fig7-17. Clockwise rotate
the turntable by 90°. Then clamp the tire presser
at the tool head（Fig51）. Continue rotating the
turntable until the operation is completed.
Fig 7-15
Fig 7-16
Fig 7-17
7.3 Right helper installation：
Before installation, you must switch the
power supply and air source!
7.3.1 Open up the package box and check as per the
accessory list and Fig7-18. Clean the equipment for
assembly. After assembling, it looks as Fig7-19.
Prepare the tools required. The accessory is as
follows：
A fix plate
B inner hex screw M10X20 (plain washer) 2sets
C inner hex screw M10X25（nuts and plain washer）
2sets
D hex screw M10X130（nut and plain washer）4sets
E ø8PU hose