NHProEquip TC-1300, Руководство пользователя

Страница: 11 / 36

10
4.2.3 Air source
4.2.3 First take out the air source connect（Fig4-14
A） from the accessory box. Insert the connect at
the outlet of the air source （
Fig4-13 A
）。
After
installation, insert the air source quick insert into the air
source connect.
Fig 4-12
Note
：
When you install the air source, you should switch
off it
！
Fig 4-13
Fig 4-14
4.2.2Install and connect pressure gauge
Via screw（Fig4-15 B）,fix the pressure gauge
（Fig4-15 A）on the column（Fig4-15 C）.
Fig 4-15
4.3Commision
All the work related to electrical must be
undertaken by the professional persons to secure
the power supply is correct and also secure the
phase connection is correct. The improper
electrical wiring will damage the motor and will
not be under the warranty.
Check whether the characteristic of your system meets the
requirement of the machine. If you have to change your