NF FRA5022, Инструкция по эксплуатации

Страница: 94 / 145

5.5 Command Explanation
FRA5022
5-16
5.5.2.2 Subsystem Commands
:CALibration[:ALL]?
Description: Executes self calibration.
Parameters: None
Response: format
<
NR1
>
, range 0/1 0: no errors, 1: error
Example: CAL?
Response example: 0
Note: Do not send another command before the self calibration is
complete. Self calibration takes approximately 50 seconds.
Create a control program that will not raise a timeout and send
the subsequent commands before the response message of
completed self calibration is received. If another command is
sent before the self calibration is complete, some malfunction
may follow. In case of any malfunction, sending the device clear
command will restore the normal operation.
:DISPlay:COORdinates <coordinates>
:DISPlay:COORdinates?
Description: Sets/queries the graph display and other data display format.
Parameters:
<
coordinates
>
graph axis (measurement value display format)
format
<
NR1
>
, range 0/1/2 0: GdB, P
-
F, 1
：
G, P
-
F, 2: a, b
Settings example: DISP:COOR 0 sets the data display format to GdB, P
-
F.
Response:
<
coordinates
>
Query example: DISP:COOR?
Response example: 0
:DISPlay:DATA:MEMory <data_memory>
:DISPlay:DATA:MEMory?
Description: Sets/queries the data memory display.
Parameters:
<
data_memory
>
data memory
format
<
NR1
>
, range 0/1/2/3 0: A, 1: B, 2: A&B, 3: A/B
Settings example: DISP:DATA:MEM 0
Response:
<
data_memory
>
Query example: DISP:DATA:MEM?
Response example: 0
:DISPlay:DATA:STORe
Description: Copies the latest measurement data (data memory A contents)
to data memory B.
Parameters: None
Example: DISP:DATA:STOR