NF FRA5022, Инструкция по эксплуатации

Страница: 90 / 145

5.5 Command Explanation
FRA5022
5-12
5.5.2.1 Common Commands
*CLS
Description: Clears the following statuses.
Standard event status register
Operation event register
Overload event register
Status byte
・・・

Note (see below)
Error queue
Parameters: None
Example:
*
CLS
Note: The
*
CLS command does not directly clears the status byte register.
Except for the MAV bit and the RQS bit, the status byte is indirectly
cleared. It is possible to indirectly clear the MAV bit by clearing the
input buffer with a device clear. It is possible to clear the RQS bit by
reading out the status with the serial pole.
*ESE <std_event_enable>
Description: Sets/queries the standard event status enable register.
Parameters:
<
std_event_enable
>
register contents, format
<
NR1
>
, range 0 to
255
Details
・・・

“5.6.3 Standard Event Status”
Example:
*
ESE 255
Response:
<
std_event_enable
>
Query example:
*
ESE?
Response example: 255
*ESR?
Description: Queries the standard event status register contents.
The query clears all the standard event status register bits to 0.
Parameters: None
Response: Register contents, format
<
NR1
>
, range 0 to 255
Details
・・・

“5.6.3 Standard Event Status”
Query example:
*
ESR?
Response example: 128
*IDN?
Description: Queries the model name etc.
Parameters: None
Response: Contents “ name of manufacturer, model name, serial number,
firmware version ” format
<
SRD
>
Query example:
*
IDN?
Response example: “NF Corporation,FRA5022,9025257,Ver1.00”