NF BP4620, Инструкция по эксплуатации

Страница: 85 / 214

4.5 Sequence Operation
BP4620
4-38
4.5.3 Sequence programming
When PROGRAM is selected in the SEQUENCE screen, the PROGRAM screen is displayed. Sequence
programming is performed using the various items displayed on the PROGRAM screen.
The step settings are performed separately for each step.
Changes in waveform through the sequence are possible only through the arbitrary waves (ARB1 to
ARB16). Before programming changes in waveform, set the output waveform to arbitrary wave
beforehand. To execute a sequence using a sine wave or square wave, set the sine wave or square wave
output to on before the start of the sequence. While executing a sequence with a sine wave or square
wave, the waveform in that sequence cannot be changed.
For the output method for sine wave, square, and arbitrary waves,
refer to “4.3.6 Setting of
waveform” .
The various items displayed on the PROGRAM screen are listed in Table 4-17.