NF BP4620, Инструкция по эксплуатации

Страница: 109 / 214

4.8 Remote Control
BP4620
4-62
USB ID format ( refer to “5.1 Preparations Before Usage”)
ENTER CANCEL
4.8.2.2 USB488
If you are using USB488, it is necessary to set the USB ID for device identification in advance. The
USB ID setting is performed in the [REMOTE] screen.
The USB ID setting range is 1 to 65534.
Set the USB ID after making sure it is correct. If the USB ID is incorrect, control from the computer is
not possible. Moreover, if the USB ID is the same as that of another device within the same system,
faults may occur in the computer.

Operation procedure
<1> Press the and keys to move the cursor to the icon.
ENTER CANCEL
<2> Press the
ENTER
key to display the MISC screen.
Press the and keys to move the cursor to [REMOTE].
ENTER CANCEL
<3> Press the
ENTER
key to display the REMOTE screen.
If [INTERFACE] is USBTMC, switch interface to USB488.
Press the and keys to select [USB488 ID].