NF BP4620, Инструкция по эксплуатации

Страница: 37 / 214

2.5 Power on/off and Operation Check
BP4620
2-16
2.5 Power on/off and Operation Check
Once the connections have been completed, check the operation.
(1) Check whether the BP4620 is correctly connected as described heretofore.
(2) Switch the power switch of the BP4620 to on. Power is supplied and the BP4620 starts operating.
<1> Raise the lever of the POWER switch (

). <2> The LCD lights up and the startup screen is displayed.
(3) The operation panel immediately after the power has been switched on shows the same setting
values as when the power was switched off the previous time. If the BP4620 is switched on for
the first time after it is purchased, the internal default settings are applied.
For the operation method to read the setting values saved in the memory, Refer to “4.7
Memory Functions” .
(4)
To switch the power off, lower the lever of the power switch (  ) after checking the OUTPUT off
status. As a result, the power supply to the BP4620 is disconnected and the power is switched off.

Securely connect all the required cables. Improper connection may cause equipment failure.

Before switching the power off, be sure to check that OUTPUT is in the off status.
！
CAUTION