NF BP4620, Инструкция по эксплуатации

Страница: 51 / 214

4.1 LCD Screen
BP4620
4-4
The various areas of the screen display the following information.
A: Status window: This area displays the various statuses of the BP4620.
B: Message box: If an error occurs, a message box appears under the Status
window, displaying the cause of the error. The message box
automatically closes after 1.5 s. The overload and sequence
progress statuses are also displayed in this message box.
C: Measurement Value window: This area displays measurement values.
D: Menu window: This area is where settings are performed.
E: Error Message Display window: If an error that requires confirmation input by the user occurs,
a warning message is displayed in the Error Display window.
This message continues to be displayed until the [ENTER]
key is pressed.
4.1.1 Status icons
Status icons that indicate the status of the BP4620 are displayed in the top part of the Status window.
Table 4-1 shows the status icons that are displayed.
Table 4-1. Status Icon List
Icon Item Description
Drained battery
This icon flashes when the battery is judged to be drained upon
occurrence of a backup memory sum-check error.
Calibration data valid/invalid This icon flashes when the calibration data is invalid.
Error This icon lights for a few seconds when an error occurs.
Busy This icon lights when the status is busy.
Overload This icon flashes during overload.
Sequence in progress
These icons are displayed in the same location on the operation panel.
The icon that is displayed depends on the sequence status, as follows.
Idle status: Nothing is displayed.
Run status: is displayed.
Hold status: is displayed.
Sequence hold in progress
Key lock This icon lights when the key lock is set to on.
Remote
These icons are displayed in the same location on the operation panel.
The icon that is displayed depends on the status of the BP4620.
Local: Nothing is displayed.
Remote: is displayed.
Local lockout: is displayed.
Local lockout