NextBase Ride BikeCam, Инструкция по эксплуатации

Страница: 20 / 68

VIDEO MODE (CONTD.)
Video settings menu continued.
10. GPS Stamp
Turn On / Off both the GPS co-ordinates and speed stamp that are shown on recorded files.
When a recording is viewed using the Driving Recorder Player the GPS co-ordinates, speed
information and map location remain available.
Default Setting: On
11. HUD Speed & Compass
When turned on, the screen will display current speed and a compass after the selected period
of time, press any button to return to normal viewing, this function is only available when a GPS
connection is present.
Default Setting: Off
11. Speed Units
Select whether to record and display speed in KMH or MPH.
Default Setting: MPH
12. Time Lapse
Turn on the Time Lapse function, frames will then be recorded at a lower rate than real time.
When replayed the time appears to be moving faster.
Default Setting: Off
13. Number Plate
Enter the registration number for your bike, this will then be shown on the video file.
The default settings have been carefully selected to allow you to use the BikeCam without the need
to change any settings.
Note:
- Within the SETUP menu which is accessed by pressing the MENU button twice, there is a
‘Default Settings’ option to allow you to reset the BikeCam to the factory defaults, if required.
20