NextBase Ride BikeCam, Инструкция по эксплуатации

Страница: 10 / 68

INSTALLATION
Please read the information contained within this manual to ensure the installation of the BikeCam is
carried out correctly and safely.
1. Insert memory card
Remove the end cap from the rear of the BikeCam and insert a MicroSD card (8-32Gb Class10).
Take care to ensure that the MicroSD card is the correct way round (gold contacts facing down).
Push the memory card until it clicks into place. Use the edge of a small coin (or similar object) to
push the memory card in place if required, a second push inwards will release the memory card.
Note:
- Do not remove or insert the memory card when the BikeCam is turned on, doing so may
damage the memory card and corrupt any files within.
10