NextBase Ride BikeCam, Инструкция по эксплуатации

Страница: 19 / 68

VIDEO MODE (CONTD.)
Video settings menu
The Video settings menu is accessed by pressing the MENU button whilst in Video mode. Use the
UP and DOWN buttons to highlight setting and press the OK button to enter the options screen.
Select the required option and press OK to confirm, press MENU again to return to video mode.
Note:
- Menus are not accessible during recording. Stop recording firstly to access the menu.
1. Resolution
Select recording resolution, this will increase or decrease the quality of the recorded video.
Default Setting: 1080P
2. Exposure
Select exposure, used to adjust exposure level for different light conditions.
Default Setting: 0
3. White Balance
Adjust the white balance for different light conditions.
Default Setting: Auto
4. Record Audio
Turn On / Off audio recording.
Default Setting: On
5. Date Stamp
Turn On / Off the date stamp shown on recorded files.
Default Setting: On
6. Speed Stamp
Turn On / Off the Speed Stamp shown on recorded files.
Default Setting: On
7. NEXTBASE Stamp
Turn On / Off the NEXTBASE Stamp shown on recorded files.
Default Setting: On
8. Video Length
Select duration of recording length for the individual video files, the BikeCam will fill the
SD Card then loop back to the beginning, overwriting the oldest files (unless protected).
Default Setting: 3 Minutes
9. G Sensor
Turn Off or adjust the sensitivity of the G Sensor, it is the G Sensor that detects forces
which will automatically protect the current recording in event of a collision.
Default Setting: Middle
19