NextBase Ride BikeCam, Инструкция по эксплуатации

Страница: 9 / 68

PARTS & CONTROLS (CONTD.)
3. LED indicators
Blue = charging / Red = power on / Red flashing = recording
4. End cap
Remove to gain access to the MicroSD slot, Micro USB 2.0 socket and RESET button.
5. Base plate
Used to secure the BikeCam to the supplied Bar Mount, see page 15 for details.
The base plate also has a threaded insert (1/4" UNC type) that can be used to mount the
BikeCam with a variety of camera or professional RAM mounts, see page 16 for details.
6. Micro USB 2.0 socket
Connect the supplied 5Vdc power cable or hard-wire cable here.
Note:
- Pull back the sleeve from the power cable connector so you can ensure the MicroSD
connector is correctly located BEFORE tightening the power cable to the BikeCam.
- Do not over tighten, or damage may result.
7. RESET button
In the unlikely event the BikeCam becomes unresponsive press the RESET button to restart.
8. MicroSD card slot
9. LED torch
10. Camera lens
1
RESET
USB
2
3
4
5
10
9
6
8
7
09